How do you fix a white screen on a Mac?

How do you fix a white screen on a Mac?
Please follow these steps:

  1. Turn off your Mac.
  2. Restart your Mac and hold option+R keys immediatelyafterthe Apple startup chime.
  3. When your computer starts up, you will see the OS Xutilitiesmenu.
  4. Select Disk Utility and click Continue.
  5. Select your start up disk.
  6. Click Repair Disk.
  7. Then reboot your Mac.


In this manner, what do I do if my Mac has a white screen?

How to Recover From a White Screen When BootingaMac

  1. Reboot into Safe Mode.
  2. Reset NVRAM.
  3. Reset SMC.
  4. 1) Shut down your MacBook.
  5. 2) Connect the power adapter to the Mac.
  6. 3) On the keyboard, hold down the Shift + Control + OptionkeysAND the power button at the same time.
  7. 4) Release all keys and the power button simultaneously.
  8. 5) Boot the Mac as usual.

Subsequently, question is, how do I fix my Mac that won’t boot up? Hold down all of these keys: Command, Option (Alt), PandR, and turn on the Mac (it’s the same keys toresetthe PRAM). Keep holding the keys down until youhearthe Mac restart again. Apple says to let itrestartjust the one time; I usually listen for asecondreboot, and then release thekeys.

Similarly, it is asked, what does a white screen on a Mac mean?

This white (or gray) screen means thatyourmacOS or OS X can’t start because of problems withthesystem’s hardware or software. If your Mac fails tostart-upregularly, try these quick tips to troubleshootyourproblem(s).

Why is my Mac stuck on the startup screen?

Shut down your computer; restart and then hold downthe”Command-R” keys until you see the OS X Recoveryutilityscreen. Select the “Disk Utility” option and selectthe”First Aid” tab. Select your hard drive from the sidebar andthenclick “Repair” to diagnose and repair the disk.

Related Question Answers

How do you force start a Mac?

Press the Shift+Control+Option keys at the left sideofthe keyboard and the Power button, and hold them all down.Releaseall four buttons at the same time, and then press the Powerbuttonto turn the Mac on. On MacBooks with a removablebattery,unplug the Mac from its power source and removethebattery.

What is the Command key on a PC?

The CTRL is an abbreviation for Control, and it’sthemain key on your Windows PC that you use forkeyboardshortcuts. If you have a Mac, you also have a Controlkey,but your primary keyboard shortcut key isCommand.Like Alt/Option and Shift, these are modifierkeys. When youpress them, nothing obvioushappens.

How do I boot my MacBook Pro in safe mode?

To load your Mac in Safe Mode, press and holdtheShift key while it boots. You can stop holding the Shift keywhenyou see an Apple logo and progress bar. To leaveSafeMode, just reboot your Mac without holding theShiftkey.

What causes a laptop screen to go white?

The problem of the white laptop screen canappeardue to the faulty graphics card. If the reason behindtheoccurrence of white screen on your laptop isthegraphics card, you need to replace it to eliminate theissue.Another method to solve the white laptop screen errorissystem restore.

Can LCD monitor be repaired?

If any cables tear during the repair, theLCDmonitor will not work. You can try taking it toaprofessional repair service, but this is most likely theendof its life. A blown fuse usually destroyed itself due toanunderlying problem, and the replacement may dothesame.

How do I fix my computer screen?

How to Fix a Sideways Screen in Windows 10

  1. Hit CTRL + ALT + Up Arrow and your Windows desktop shouldreturnto landscape mode.
  2. Choose a screen to fix if you have multiplemonitorsattached.
  3. Select Landscape from the orientation menu.
  4. Click Apply (or OK)
  5. Click Keep Changes when prompted.

Why is my screen white on my phone?

A white screen usually means that the LCD inthedisplay assembly has either been damaged or its connection tothelogic board may have come loose. First of all chech the LCDcableto see if it’s lose. then disconnect the front camera and turniton. If it turns on it’s proximity sensor if not testthebattery.

How do you force restart a laptop?

To force-shutdown a desktop or laptop,youneed to press and hold the power button for about fiveseconds.Then, wait another five seconds or so before turning themachineback on. Hopefully this is something you won’t need to doveryoften, as a force-shutdown can hose up Windows or evenleadto data loss.

How do I boot up in safe mode?

Start Windows 7/Vista/XP in Safe ModewithNetworking

  1. Immediately after the computer is powered on orrestarted(usually after you hear your computer beep), tap the F8key in 1second intervals.
  2. After your computer displays hardware information and runsamemory test, the Advanced Boot Options menu will appear.

Why won’t my computer monitor turn on?

If the light on the monitor remains off,themonitor is not receiving power from either the walloutletor the power adapter. If you have a flat panel LCDmonitor,unplug the monitor power cable, wait about 30seconds,reconnect the cable and then turn on themonitor.This resets the electronics on themonitor.

How do I turn my laptop screen off?

Use BlackTop to turn off Windows 10laptopscreen BlackTop is a small utility that helps you toturnoff the monitor with a keyboard shortcut. Whenrunning,the program sits in the system tray. To turn offthescreen, you just need to use Ctrl + Alt +Bhotkey.

Trending Answers